OPTICS CRYSTALS LASERS
   
 
ATR Prisms

MATERIAL - Ge (Germanium)


Crystaltechno LTD makes ATR prisms from different types of IR optical crystals

ATR (Attenuated total reflection) prisms are used spectral analysis of liquids and gases.


PARAMETER VALUE
 
  Surface form tolerances - Flatness   Lambda/2 at 633 nm per inch  
  Surface form tolerances - Irregularity   Lambda/2 at 633 nm  
  Scratch-Dig   60 - 40  
  Size tolerance   +/- 0.1 mm  
  Angle tolerance   +/- 20 arc minutes  
  Bevels   (0.1 - 0.2) mm x 45 degrees  

Size, mm/angle, degree Part Number
 
  12 x 5 x 1 / 30   ATRP14-111  
  12 x 5 x 1 / 45   ATRP14-112  
  12 x 5 x 1 / 60   ATRP14-113  
  12 x 5 x 2/ 30   ATRP14-121  
  12 x 5 x 2/ 45   ATRP14-122  
  12 x 5 x 2/ 60   ATRP14-123  
  50 x 5 x 2 / 45   ATRP14-222  
  50 x 5 x 3 / 45   ATRP14-232  
  50 x 10 x 1 / 30   ATRP14-311  
  50 x 10 x 1 / 45   ATRP14-312  
  50 x 10 x 1 / 60   ATRP14-313  
  50 x 10 x 2 / 30   ATRP14-321  
  50 x 10 x 2 / 45   ATRP14-322  
  50 x 10 x 2 / 60   ATRP14-323  
  50 x 10 x 3 / 30   ATRP14-331  
  50 x 10 x 3 / 45   ATRP14-332  
  50 x 10 x 3 / 60   ATRP14-333  
  50 x 20 x 1 / 30   ATRP14-411  
  50 x 20 x 1 / 45   ATRP14-412  
  50 x 20 x 1 / 60   ATRP14-413  
  50 x 20 x 2 / 30   ATRP14-421  
  50 x 20 x 2 / 45   ATRP14-422  
  50 x 20 x 2 / 60   ATRP14-423  
  50 x 20 x 3 / 30   ATRP14-431  
  50 x 20 x 3 / 45   ATRP14-432  
  50 x 20 x 3 / 60   ATRP14-433  

Both the parallelogram and trapezoid shapes are available.

Perhaps you will find the required ATR prisms and other optics at our stock, please see item Optical Crystals.

 



 
 
 
Si
Ge
ZnSe


Ordering Info
 
  (c) Crystaltechno Ltd. Vernadskogo 113-106, Moscow 119571, Russia
+7 (495) 234-5951, 234-5952, 956-7610
fax +7 (495) 433-1551
sales@crystaltechno.com
Site suggestions: webmaster@crystaltechno.com